Beyblade X Maintenance — Keep Your Beys Battle-Ready

A worn bit loses stamina, a chewed ratchet bursts early, and a dusty stadium slows everyone down. Ten minutes of care a month keeps your gear performing like day one.

Bits: the fastest-wearing part

The bit tip is the only part touching the stadium, and plastic against plastic at thousands of RPM wears measurably.

• Inspect monthly: look at the tip under light. Flat bits develop a polished ring; ball bits flatten at the contact point. Visible flattening = measurable stamina loss.
• Rotate your bits: if you own duplicates, alternate them. Tournament players keep a "fresh" set unused until event day.
• Rubber bits age fastest: Rush, Accel and other rubber-family tips lose grip as the rubber glazes. Wipe with a barely-damp cloth to remove dust film — never solvents, which harden rubber.

Ratchets: check the teeth

Burst resistance lives in the ratchet's teeth. Every burst grinds them slightly; hundreds of battles round them off.

• The click test: assemble the combo and twist gently. Crisp, defined clicks = healthy. Mushy or slipping clicks = the ratchet is wearing out and will burst earlier than our simulator predicts.
• Don't over-tighten: assembling with excessive force accelerates tooth wear. Firm click, then stop.

Blades: tough, but not immortal

• Metal blades shrug off battle damage, but check for burrs after hard wall hits — a raised metal edge can scratch your stadium. Fingernail test: if you feel a snag, it's a burr. (A worn stadium slows every bey in it.)
• Never sand, file, or weight a blade. Beyond being illegal in sanctioned play, modified parts behave unpredictably and our simulator's data no longer applies to them.

The stadium

• Dust is the enemy: a microfiber wipe before sessions keeps the floor fast. Dust acts like sandpaper under a spinning tip.
• Check the Xtreme Line: clear any debris from the rail teeth — a blocked rail kills Xtreme dashes.
• Store flat: stadiums warp if stored on their side in heat. A warped floor makes every battle drift toward one pocket.

Storage & transport

• Store beys disassembled or loosely assembled — long-term full assembly keeps spring tension on the ratchet teeth.
• Keep them out of hot cars and direct sun; plastic softens and rubber degrades above ~50°C.
• The Gear Case (BX-25) or any padded case beats a loose backpack pocket, where bits get gouged by keys and zippers.

Launcher care

• Winders: keep the rack teeth clean; grit in the teeth shreds the gear inside the launcher.
• String launchers: pull smoothly to full extension, never past it, and let the string retract under control. A snapped string is the #1 string-launcher death.